WHat is rcd testing?
Efficient RCD testing for total peace of mindResidual Current Devices (RCDs), also called safety switches, are essential for workplace safety. Our cost-effective RCD testing services ensure compliance with Australian standards while protecting people from electric shocks and preventing electrical fires. RCDs work by continuously monitoring the current flow in both active (supply) and neutral (return) conductors. If an imbalance is detected, the RCD immediately disconnects the electricity supply, reducing the risk of injury or damage.
Hand-Held Equipment
Smaller powered tools such as drills, sanders, and hairdryers.
Portable Electrical Devices
Extension leads, electric mowers, and portable power boards.
Heavy-Duty Equipment
Tools used in wet, dusty, or high-vibration environments.
Mobile Equipment
Bench saws, electric welders, and cement mixers.
EQUIPMENT THAT REQUIRES rcd testing
Does your equipment need RCD testing?RCD safety switches protect your workplace from electrical accidents, but only if they’re working properly. We test the equipment most likely to cause electrical accidents, ensuring your RCDs respond in milliseconds when it matters most. Certain types of equipment carry higher electrical risks due to how and where they’re used. Power tools on construction sites, equipment in wet areas, and mobile devices moved between locations all benefit from RCD protection.
Key Standards and Guidelines for RCD Testing
RCD testing standardsRCD testing is not just about compliance—it’s about ensuring a safer environment for everyone. Here’s a closer look at the standards and recommended practices that guide proper RCD testing and inspection:
- AS/NZS 3760: The cornerstone standard for testing and inspecting electrical equipment in service, ensuring affordable RCD testing services remain compliant with Australian standards. It ensures that all devices, including RCDs, are checked for safety and functionality to protect people and property.
- AS/NZS 3012: Tailored specifically for construction and demolition sites, this standard sets additional requirements for electrical installations in high-risk environments.
- WHS Regulation Clause 165: This regulation requires workplaces to ensure all RCDs are regularly tested by a competent person to confirm they are working effectively.
HOw often is RCd testing required?
Recommended RCD testing schedule- Environment
- Construction Sites
- Workshops and Factories
- Offices
- Hire Equipment
- Trip Time Testing
- Every 1 to 3 months
- Every 6 months
- Annually
- Every 3 months or before each hire
- Push-Button Testing
- Monthly
- Every 3 months
- Every 6 months
- Monthly
GET A FREE rcd testing QUOTE
Fast, compliant, cost-effective. Go Test and TagRequest a quote today and let us safeguard your workplace with professional RCD testing services aligned with Australian safety standards.
Why is RCD Testing Essential?
By adhering to RCD testing requirements, you not only meet legal obligations but also safeguard lives, assets, and business continuity.
Life-Saving Protection
RCDs prevent fatal electric shocks and significantly reduce the risk of fires caused by electrical faults.
Legal Compliance
Australian WHS regulations mandate regular RCD testing to ensure a safe and compliant workplace.
Risk Mitigation
Routine testing helps identify potential faults before they escalate into serious hazards, preventing injuries, equipment damage, and downtime.
Insurance Compliance
Many insurers require up-to-date RCD testing as a condition for coverage, ensuring your business remains protected.
Preventing Accidents
Properly functioning RCDs save lives and minimise risks to property by preventing electrical shocks and fires.
Testimonials
Hear from the businesses that trust us
Extremely professionalThe technician was extremely professional I must say, and finished his work within a scheduled timeframe.
Would hire again!Prompt and professional service. Would hire again!
Professional & Efficient!Excellent service! Professional & Efficient! Thank you!
Quick and good serviceQuick and good service in best price. Satisfied customer.
Went above and beyondGo Test & Tag went above and beyond to deliver friendly, affordable and prompt service
Highly recommend!Easy, breezy, would highly recommend!!!
Complete safety testing services
All your safety testing requirements coveredAt Go Test and Tag, we offer a wide range of test and tag services designed to ensure the safety and compliance of electrical equipment in various workplaces across Australia. Our suite of safety services integrates seamlessly to provide comprehensive coverage for all your testing needs. While each service addresses a specific set of safety requirements, having one point of contact eliminates the hassle of coordinating multiple contractors and takes the administrative burden off your shoulders.
RCD Testing Process
We use a structured process to ensure RCD testing meets Australian safety standards- Visual Inspection
- Check for visible signs of damage, wear, or overheating.
- Ensure that cables and connectors are securely anchored and in good condition.
- Push-Button Test
- Simulates a fault to ensure the RCD trips correctly when activated.
- Trip Time Test
- Measures the time it takes for the RCD to trip during a simulated fault.
- Compares results against standards and ratings:
- Type I RCDs: Must trip within 30 milliseconds for a residual current not exceeding 10 milliamps (mA). Commonly used in high-sensitivity environments like hospitals and medical facilities.
- Type II RCDs: Must trip within 300 milliseconds for a residual current not exceeding 30 milliamps (mA). Suitable for general protection in workplaces and homes.
- Documentation and Tagging
- Issue a detailed test report for compliance records, including test results and technician details.
- Attach compliant tags to RCDs, indicating the test date and next due date for easy identification.
Industries we work with
Partnering with businesses across all industriesAt Go Test and Tag, we understand the importance of keeping your workplace safe. We’ve helped businesses, factories, workshops, hospitals, nursing homes, labs, construction sites, and even educational institutions mitigate potential electrical risks. Following Australian standards, our RCD testing services help identify potential hazards, ensuring your equipment is safe for daily use and meets compliance requirements across industries.
Government & corporate
Hospitality, food & tourism
Retail, shops & workshops
Healthcare & social services
Construction & manufacturing
